| Specification | Description |
|---|---|
| Machine Travels (X,Y,Z) | 20.1" x 16.2" x 18.1" |
| Table Size | 27.5" x 16.5" |
| Max Table Capacity | 660 lb. |
| Table Tee Slots (3) | 11/16" |
| Spindle Nose to Table Surface | 4.6" min / 22.6" max |
| Table Surface to Floor | 31.3" |
| Max Spindle Speed | 200 - 6,000 RPM |
| Rapid Traverse Rate (X,Y,Z) | 710 / 710 / 550 ipm |
| Cutting Feed Rate (X,Y,Z) | .04 - 157 ipm (all three axes) |
| Maximum Thrust (Z Axis) | 1,850 lb. |
| Spindle Taper | 40 Taper |
| Spindle Drive | 5.5 HP Cont / 7.5 HP Duty Cyc |
| Toolchanger Capacity | 18 Twin Arm ATC |
| ATC Max. Weight, Full | 123.5 lb. |
| Maximum Tool Diameter | 3.7" |
| Maximum Tool Weight | 13.2" |
| Approx Machine Dimensions | 76.8" x 96.6" |
| Maximum Machine Height | 93.8" |
| Approximate Weight | 7,400 lb. |
| Electrics | 220 volt/3 Ph/60 VAC/40 amp |