Mazak MultiPlex 6300 CNC Dual Spindle Lathe with Gantry Load and Work Stock

Click Photo(s) to Enlarge
Stock
N/A
Model
Multiplex 6300
Age
2006


Specification
Description
Control
Mazatrol 640T CNC Control
Max Swing
16.93"
Chuck Size Capacity
12"
Distance Between Spindles
57.09"
Machining Diameter Standard / Max
13" / 16.93"
Max Machining length Chucking / Shaft
8.86" / 25.59"
Max Bar Feed Diameter
3.03"
Spindle Nose
JISA2-8"
Hole Thru Spindle
3.46"
Max Spindle Speeds
4,000 RPM
Spindle Indexing
Full-C-Axis (.001 Degree) Both Spindles
Spindle Drive
30 / 26 HP
Turret Stations
(2) 12 Station Turrets (Live Milling Capable)
Turret Index Time
.3 Sec 1 Station / 1.2 Seconds Opposite Station
Turret Live Milling Speeds
21 - 4,000 RPM
Live Milling Drive Motor
10 HP
Turret Travels X / Z
12.2" x 23.82"
Turret Rapid Traverse Rates X/ Z
945 IPM
Gantry Loader Model
Flex-GL200F
Controllable Loader Axes
2 Axes
Loader Traverse Rate
4724.2 IPM
Gripper Hand Model
Hand D3 - 3-Jaw Grippers
Gripper hand capacity Diameter / Length
1.97" - 11.81" Diameter x .98" - 5.91" Length
Gripper Weight Capacity
44 Lbs. x 2 Parts
Work Stocker Stations
12 Station Rotary Stocker
Coolant Capacity
71 Gallons
Equipped with: Mazatrol 640T CNC Control, 12 Station Rotary Work Stocker, (2) 12 Station Turrets with Live Milling, Mazak Flex-GL200F CNC Gantry Load System, Floppy Disk Drive, Ethernet, Full-C-axis On Both Spindles, (2) Automatic Tool Presetters, Rear Discharge Chip Conveyor, Coolant System,Remote Jog Hand-wheel, Transformer, (4) Live Axial Tool Holder, (4) Live Radial Tool Holders, Assorted Static Turret Holders, Manuals and Schematics.