Used Machine ToolsIMG_5591.JPGIMG_1086.JPGIMG_0849.JPGIMG_0272.JPGIMG_0073.JPG
Bridgeport Harig EZ Surf 3-Axis Automatic 6"x18" Programmable Surface Grinder with 6"x18" OS Walker Fine Pole Variable Electromagnetic Chuck

Bridgeport Harig EZ Surf 3-Axis Automatic 6"x18" Programmable Surface Grinder with 6"x18" OS Walker Fine Pole Variable Electromagnetic Chuck

Stock: 3581Manufacturer: Bridgeport Harig Model: EZSurfAge: N/A

Control: Bridgeport EXSurf Programmable Control

Chuck Size: 6" x 18"

Max Long. Travel: 20"

Max Cross Travel: 6.75"

Max Table to Wheel: 12" Max Spindle Center to Table

Longitudinal Feed Rate: 1/4" - 30 FPM Variable Feed Rate

Wheelhead Automatic Feed Increments: .00001" Minimum Wheelhead Increments

Wheel Size: 8" x 1.25" x 1.25" Hole

Spindle Speed: 3450 RPM

Spindle Drive: 1.5 HP

Description:

Bridgeport EZSurf Programmable Control, 3-Axis Automatic Operation, O.S. Walker 6"x18" Fine-Pole Electromagnetic Chuck with Variable Control, MDI-Teach-Programming, Profile Grind and Profile Dress, 2-Axis Linear Programmable Control on Y and Z Axis, Dwell, Manual Operation Via Handwheels, Coolant Pump and Tank, RS-232 Port, 3.5" Floppy Drive, Grinding Wheel Nut, Manuals and Control Disks.

Equipped With:

Bridgeport EZSurf Programmable Control, 3-Axis Automatic Operation, O.S. Walker 6"x18" Fine-Pole Electromagnetic Chuck with Variable Control, MDI-Teach-Programming, Profile Grind and Profile Dress, 2-Axis Linear Programmable Control on Y and Z Axis, Dwell, Manual Operation Via Handwheels, Coolant Pump and Tank, RS-232 Port, 3.5" Floppy Drive, Grinding Wheel Nut, Manuals and Control Disks.

Electrics:

208 Volt 3 Phase

VIDEOS