Bridgeport Harig EZ Surf 3-Axis Automatic 6"x18" Programmable Surface Grinder with 6"x18" OS Walker Fine Pole Variable Electromagnetic Chuck
Control: Bridgeport EXSurf Programmable Control
Chuck Size: 6" x 18"
Max Long. Travel: 20"
Max Cross Travel: 6.75"
Max Table to Wheel: 12" Max Spindle Center to Table
Longitudinal Feed Rate: 1/4" - 30 FPM Variable Feed Rate
Wheelhead Automatic Feed Increments: .00001" Minimum Wheelhead Increments
Wheel Size: 8" x 1.25" x 1.25" Hole
Spindle Speed: 3450 RPM
Spindle Drive: 1.5 HP
Bridgeport EZSurf Programmable Control, 3-Axis Automatic Operation, O.S. Walker 6"x18" Fine-Pole Electromagnetic Chuck with Variable Control, MDI-Teach-Programming, Profile Grind and Profile Dress, 2-Axis Linear Programmable Control on Y and Z Axis, Dwell, Manual Operation Via Handwheels, Coolant Pump and Tank, RS-232 Port, 3.5" Floppy Drive, Grinding Wheel Nut, Manuals and Control Disks.
Bridgeport EZSurf Programmable Control, 3-Axis Automatic Operation, O.S. Walker 6"x18" Fine-Pole Electromagnetic Chuck with Variable Control, MDI-Teach-Programming, Profile Grind and Profile Dress, 2-Axis Linear Programmable Control on Y and Z Axis, Dwell, Manual Operation Via Handwheels, Coolant Pump and Tank, RS-232 Port, 3.5" Floppy Drive, Grinding Wheel Nut, Manuals and Control Disks.
208 Volt 3 Phase