42cf94e3fba5619326c70fa7bede344f.jpg895d77ddc2cccfdbc98233545200b1cf.jpg3416509b709da595955c3245b4909f77.jpgbec1134074b231bd8d65a2a74ffa2d54.jpg3b3df8ac9047fe2db733932391679182.jpg
Mazak Integrex 200-IV ST CNC Multi-Axis Mill-Turn Lathe with B-Axis Milling Head, Sub Spindle, Lower Turret, and Mazak FLEX-GL150F Gantry Load/Unload System

Mazak Integrex 200-IV ST CNC Multi-Axis Mill-Turn Lathe with B-Axis Milling Head, Sub Spindle, Lower Turret, and Mazak FLEX-GL150F Gantry Load/Unload System

Stock: 6680Manufacturer: Mazak Model: Integrex 200-IV STAge: 2010

Control: Mazatrol Matrix CNC Control with Voice Advisor

Max Swing / Max Swing Over Cross Slide: 26"

Max Machining Diameter Upper / Lower: 26" / 10.6"

Max Machining Length: 58.86"

Maximum Bar Capacity: 2"

Main Spindle Chuck Size: 8"

Main Spindle Speeds: 35-5,000 RPM

Main Spindle Nose / Bore: A2-6

Main Spindle Indexing: Full C-axis (0.0001 Degree)

Main Spindle Drive: 30 HP

Second Spindle Chuck Size: 8"

Second Spindle Speeds: 35-5,000 RPM

Second Spindle Indexing: Full C-Axis (0.0001 Degree)

Sub Spindle Drive: 25HP

Second Spindle Headstock Stroke (W Axis): 61.02"

Second Spindle Rapid Traverse Rate: 1,181 IPM (W)

Milling Head Speeds: 12,000 Max RPM

Milling Head B-Axis Programmable: 225 Degrees (120 Deg Left / 105 Deg Right)

Milling Head Travel X / Z / Y: 22.83" x 60.82" x +/- 3.15"

Milling Head Drive: 25 HP

Milling Head Taper: KM63 Taper

Rapid Traverse Rates Milling Head (X / Z): 1,496 IPM

Automatic Tool Changer Capacity for Milling Head: 40 Station Automatic Tool Changer

Tool Changer Speed: 1.3 Seconds Tool to Tool

Max Tool Diameter/ Length / Weight: 3.54" or 4.92" x 11/81" Length, 22 Lbs.

Lower Turret Travels: 5.91" x 58.66"

Lower Turret Capacity: 9 Stations

Lower Turret Index Time: .14 Seconds Per Step

Lower Turret Rapid Traverse Rate (X / Z): 1,496 IPM

Cooolant Capacity: 120 Gallons

VIDEOS

Equipped With:

Mazak Mazatrol Matrix CNC Control, Mazak FLEX-GL150F Gantry Load/Unload System, 8" 3-Jaw Chucks on Main and Sub Spindle, Full C-Axis on Main & Sub Spindles, 12,000RPM B-Axis Milling Head, KM63 Taper Spindle with 40 Station Automatic Tool Changer, 8-Station Lower Turret with Live Milling, Automatic Tool Presetter, PCMCIA Card Slow, USB Port, EIA/ISO Programming, 3D Coordinate Conversion, Rigid Tapping on Both Spindles, Chiller Unit, Coolant System and Tank, Approximately 100-150 KM63 Tool Holders Included, Machine Manuals. 

Electrics:

400 Volt 3 Phase

VIDEOS