IMG_0085.JPGIMG_0001.JPGUsed Machine ToolsIMG_5591.JPGIMG_1086.JPGIMG_0849.JPGIMG_0272.JPGIMG_0073.JPG
Viper PRO 4210 AG Bridge Type CNC Vertical Machining Center

Viper PRO 4210 AG Bridge Type CNC Vertical Machining Center

Stock: 3485Manufacturer: Viper Model: PRO-4210AGAge: 2008

Control: Fanuc 18iM CNC Control

Table Size: 163.39" x 78.74" Table

Max Table Load: 22,046 LBS

Machine Travels: 159" X / 83" Y / 42" Z

Distance Spindle to Table: 51"

Width Between Columns: 91"

Spindle Taper: CAT-50 Taper

Spindle Speeds: 6000 Max RPM, 2000 Max RPM with 90° Attachment

Cutting Feed Rate X/Y/Z: 276 IPM X/Y/Z

Rapid Traverse Rate X/Y/Z: 472 IPM X/Y/Z

Tool Changer Capacity: 40 Station Twin Arm Tool Changer

Max Tool Weight: 33 LBS

Max Tool Diameter/Length: 4.92" / 13.8"

Spindle Drive Motor: 35HP Upgraded Spindle

Description:

Fanuc 18iM CNC Control, 6000 RPM 35HP Cat-50 Spindle, 90° Programmable Angular Head Attachment with 5° Programmable Indexing, 42" Extended Z Axis, Chip Blaster 1200 PSI Through Spindle Coolant System, 40 Station Twin-Arm Automatic Tool Changer, Ballscrew and Bearing Chiller System, Harbor HBO-750 Oil Chiller System, Outboard Hydraulic System, Dual Internal Chip Auger System, Link Type Chip Conveyor System with Rear Discharge, Coolant System and Tank, Machine Enclosure, Machine Manuals. *Workholding and fixturing in photos not included**

Equipped With:

Fanuc 18iM CNC Control, 6000 RPM 35HP Cat-50 Spindle, 90° Programmable Angular Head Attachment with 5° Programmable Indexing, 42" Extended Z Axis, Chip Blaster 1200 PSI Through Spindle Coolant System, 40 Station Twin-Arm Automatic Tool Changer, Ballscrew and Bearing Chiller System, Harbor HBO-750 Oil Chiller System, Outboard Hydraulic System, Dual Internal Chip Auger System, Link Type Chip Conveyor System with Rear Discharge, Coolant System and Tank, Machine Enclosure, Machine Manuals. *Workholding and fixturing in photos not included**

Electrics:

200-200V 3Phase, 65 KVA

VIDEOS