Invema Model FR40 1300 4' Radial Arm Drill Press
Column Diameter: 250mm / 9.84"
Arm Length: 1300mm / 51.1"
Max Spindle Center to Column: 49"
Min Spindle to Column: 9.5"
Quilll Travel: 280mm / 11"
Max Spndle to Base: 1240 mm / 48.8"
Min Spindle To Base: 350 mm / 13.77"
Spindle Speeds: (6) 52 to 1450 RPM
Spindle Feed Rates: (4) .002, .004., .008, .011 IPR
Spindle Taper: #4MT
Clamping Style: Power
Base Dimensions: 53" x 25.375"
Box Table Dimensions: 24" x 18" x 18" high
Drill Capacity Steel: 40mm Drill / 60mm Boring
Spindle Drive: 4.5 HP
Invema Model FR40 1300 4' Radial Arm Drill Press
Power Clamping, Power Rail Elevation, (6) Spindle Speeds 52-1450, (4) Power Quill Feed Rates, 11" Power Quill Feed, #4MT Taper Spindle, In-Base Coolant Pump, 24" x 18" x 18" Box Table, 3/16" - 3/4" Capacity Drill Chuck
460 Volt, 3 Phase