42cf94e3fba5619326c70fa7bede344f.jpg895d77ddc2cccfdbc98233545200b1cf.jpg3416509b709da595955c3245b4909f77.jpgbec1134074b231bd8d65a2a74ffa2d54.jpg3b3df8ac9047fe2db733932391679182.jpg
Okuma LU-S1600-2SC 1000C CNC Shaft Lathe, 4-Axis, 2-Turrets, Schunk Programmable Steady Rest - Like NEW 725 Cutting Hours

Okuma LU-S1600-2SC 1000C CNC Shaft Lathe, 4-Axis, 2-Turrets, Schunk Programmable Steady Rest - Like NEW 725 Cutting Hours

Stock: Manufacturer: Okuma Model: LU-S1600-2SCAge: 2014

Control: OSP-P300L

Max Swing: 19.69"

Max Turning Diameter: 6.3"

Max Turning Length: 39.37" (1000mm)

Turret 1 Capacity: 6 Stations

Turret 1 Travels: 3.94" X / 40.15" Z

Turret 2 Capacity: 6 Stations

Turret 2 Travels: 3.94" X / 40.15" Z

Spndle Nose: A2-6

Spindle Speeds: 40-4,000 RPM

Spindle Bore: 2.44"

Programmable Tailstock: Variable Pressure Programmable Tailstock

Max Center Distance: 39.37" (1000mm)

Tailstock Quill Travel: 4.724"

Spindle Drive: 20/15 HP High Power Spindle Option

Equipped With:

Okuma OSP-300L CNC Control, Royal QC65 Quick Change Collet Chuck, (2) 6 Station Tool Turrets, Tool Presetter for Both Turrets, Programmable Tailstock with HI/LO Adjustable Thrust, Shunk THL Plus 100 Programmable Steady Rest on Lower Turret with Coolant Thru Roller Flush, Air Purge, and Central Lubricaiton Options (Quick Disconnect for Removal), *Navi L-G Audio Chatter Detection & Correction System with Automatic RPM Shift for Chatter Reduction*, 8-Spare M-Code Option, MP Systems Model RF8 High Pressure Coolant System with Individual Pressure for Each Turret, Chip Conveyor, Coolant Tank, Machine Manuals, 725 Cutting Hours!!! Installed NEW 2017

Electrics:

220/480 Volt, 3 Phase