Inventory of Used CNC Machines and Manufacturing Equipment for Sale

Haas VF Series 40 Taper TRP Assembly #30-0178

Haas VF Series 40 Taper Tool Release Piston Assembly

Haas VF Series 40 Taper TRP Assembly #30-0178

Haas VF Series 40 Taper Tool Release Piston Assembly with solenoids and limit switches

Haas VF Series Gearbox Pump Assembly #30-3260B

1998 VF series gearbox pump assembly with motor, filter and connection cables.

Haas Video PCB Board / Floppy Interface #34-3200A RevG

Haas Video Board #34-3200 RevG w Floppy Interface also Shows 32-3200A Part #

Haas VM-2 CNC Vertical Machining Center, 30" x 30" x 20", Probing, Thru Spindle Coolant, 12K Spindle

Haas VM-2 CNC Vertical Machining Center w 4th Axis Drive, Chip Auger, Coolant System, Rigid Tapping

Haas VM-3 CNC Vertical Machining Center with 12,000 RPM CT-40 Spindle, 40 Station Side Mount Tool Changer, Probing, 1000 PSI TSC, High Speed Machining, Mist Collector, Chip Auger.

Haas X-Axis Waycover Set #93-2667 For VF-5 Machines Before 2002.

Haas X-Axis Waycover Set works for left or right side on most older Haas VF-5 Machines older than 2002. 8 Sections full extension length is 60.83"

Haas X-Axis Waycover Set #93-2667 Left or Right Side For VF-5 Machines Before 2002.

Haas X-Axis Waycover Set works for left or right side on most older VF-5 Machines older than 2002. 8 Sections full extension length is 60.83"

Haas Z-Axis Waycover Set #93-4462. Used In Good Condition

Haas Z-Axis Waycover set should fit most older and newer VF-3, VF-4, VF-5 machines.

Hardinge CHNC 8-Station Turret Top Plates - 2

Hardinge DV-59 Second Operation Lathe, Variable Speed, Endworking Turret, Production Cross-Slide, Lever Collet Closer

Heimatec 8-030-55-015 ER25 Collet 90-Degree Milling Head - Like New, Dealer Demo

Like New, Dealer Demo

Heimatec 8-030-55-037 ER25 Collet 90-Degree Milling Head - Like New, Dealer Demo

Like New, Dealer Demo

Heimatec H-030-45-099 ER25 Collet 90-Degree Live Milling Head - Like New, Dealer Demo

Like New, Dealer Demo

QTY 3 AVAILABLE

HE&M V100LM-3 Vertical Tilting Band Saw

The V100LM-3 stands out for its robust construction and operator-focused design. The control console located on the front of the saw enhances ease of use, while the saw’s large cutting capacity ...

HTC Model U37-12 3/8" x 12' Hydraulic Power Squaring Shear

24" Squaring Arm, Remote Foot Trip, Front Operated Power Back Gauge with Fast and Slow Speed, Transformer

Hurco PA65-25 CNC Hydraulic Press Brake, 71 Ton x 98", Hurco AutoBend 7 Control and Back Gauge, Large Assortment of Dies

Hurco Hydraulic Press Brake with Hurco Autobend 7 Controls is an up-acting hydraulic press brake. Model PA65-25 has a 71 US Ton Capacity and a 98" Bed and Ram. 

Hyd-Mech H-18A Fully Automatic Horizontal Band Saw

Ikeda RM1000 Radial Arm Drill, 42" Arm, 11" Column,