Haas 2-Axis (Brush Type) Servo Control Box

Haas 2-Axis (Brush Type) Servo Control Box, manuals.

Haas EC-400-4AX 4-Axis CNC Horizontal Machining Center w 12,000 RPM Spindle, Probing, 60 Station ATC, TS Coolant

Haas 32-Bit CNC Control, Full 4th Axis Programmable, Automatic Pallet Changer, (2) Pallets, 300 PSI Thru-Spindle Coolant, Auxilary Coolant Filter, 60-Station Side Mount Tool Changer, USB, Floppy, Haas ...

Haas GT-20 Gang Style CNC Turning Center w Air Collet Chuck, 3" Spindle Bore, Coolant System

Haas HA5C 2 2-Spindle 5C Programmable Rotary Table with Pneumatic Collet Closers, Brush Drive Motor

Haas HA5C Brushed Type Programmable Rotary Table , 5C Indexer with Lever Type Collet Closer

Haas HA5C Programmable Rotary Table, Brush Drive Motor, 5C Lever Collet Closer, Cable, Connector

Haas HRT-210 Brush Type 4th Axis Rotary Table

Haas HRT-310 Brush Type 4th Axis Programmable Rotary Table

Haas HRT A6 Programmable Rotary Table

Brush Drive Motor, Cables and Connectors

Haas HRT-A6 Programmable Rotary Table with A2-6" Work Pallet, Brush Drive Motor, Cable and Connector

Haas HRT-A6 Programmable Rotary Table with A2-6" Work Pallet, Brush Drive Motor, Cable and Connector

Haas HRT-A6 Programmable Rotary Table with Brush Drive, 5C Pneumatic Collet Closer

Haas Lathe Chip Discharge Chutes- AS Shown

Haas Lathe Chip Discharge Chutes- As Shown (6) Available

Haas Mill Compression Type Discharge Auger Chip Cones

 Haas Mill Compression Type Discharge Auger Chip Cones- As shown

Haas Servo Bar 300 Magazine Barfeeder

Haas ServoBar 300 Magazine Bar Feeder, Cables and Connectors, Alignment Plate.

Haas ServoBar 300 Programmable Servo Magazine Bar Feed

Haas SL-20APL CNC Turning Center with Live Milling, C-Axis Programmable and Automatic Parts Load / Unload - Only 351 Spindle Hours!

Haas CNC Control with Coldfire Processor, Haas Automatic Part Load / Unload Gantry System, Auto-Door, Parts Table, C-Axis Programmable Spindle, Live Milling, Hybrid VDI Style 12 Station Tool Turret (6 ...

Haas VF-0 CNC Vertical Machining Center

Haas 32 Bit CNC Control, Chip Auger, Programmable Coolant Nozzle, 1MB Expanded Memory, Quick Code Programming, Rigid Tapping, 4th Axis Drive Pre Wire.

Haas VF-1 CNC 5-Axis Vertical Machining Center w Haas TRT-160 2- Axis Programmable Rotary Table - ONLY 391 Spindle Hours!

Haas 32 Bit CNC Control, 4th and 5th Axis Programmable CNC Contros (Brushless Drive Style), 24 Station Twin-Arm Automatic Tool Changer, 7,500 Max Spindle RPM, Cat 40 Spindle Taper, Haas TRT-160 Tiltin...

Haas VF-2 CNC Vertical Machining Center

Rigid Tap, Chip Auger, USB Port, 1 GB Memory, Coolant Tank & Pump

Note: Workholding Pictured is Not Included

Haas VF-2SS CNC Vertical Machining Center

Haas 32-Bit CNC Control,  12,000 Max RPM Spindle, Remote Jog Handle, Haas Probing with Parts Probe, 16MB Expanded Memory, Coordinate Rotation and Scaling, Spindle Orientation, Floppy, Thru Spindl...