Okamoto Accugar ACC124N 12" x 24" Automatic Surface Grinder with Incremental Downfeed, Walker Electromagnetic Chuck
LOT No: 80Category: Surface Grinder, Automatic, Horizontal Spindle
Server time
---
buyer premium 15.000%
will be charged on this item
tax 6.250%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
11/09/2021 12:00:00 AM CT
Date Ending
11/30/2021 10:34:55 AM CT
Time Remaining
bidding completed
Current High Bid
$7,275.00
# of bids
77
Curr. High Bidder
b****g
First Bid
$1.00
Item Location
Blaine, MN
Country
US
Lot 80: Okamoto Accugar ACC124N 12" x 24" Automatic Surface Grinder with Incremental Downfeed, Walker Electromagnetic Chuck
Equipped With:
Over-the-Wheel Dresser, Coolant System w Magnetic Filtration, Incremental Downfeed, Walker Fine-Pole Electromagnetic Chuck and Control, Wheel Hub and Nut
Electrics:
220 Volt, 3 Phase
Manufacturer: Okamoto Model: Accugar ACC124N Year: 1984 Serial Number: 7075
Main Unit Approx Weight: 4900.00 lbs
Main Unit Dimensions (in inches): Length: 101.00" Width: 70.00" Height: 75.00"
Components:
Coolant PUmp & Tank: Length: 36.00" Width: 36.00" Height: 28.00"
Specs:
Table Working Surface: 23.75" x 11.80"
Max Chuck Size: 24" x 12"
Max Table Movement (Manual): 29.5"
Max Distance Spindle / Wheel to Table: 13.7" Under 12" Diameter Wheel
Max Wheel Size : 12" x 1.5" x 5" Bore
Wheel Speed: 1,800 RPM
Auto Longitudinal Feed Rate: 1.0 - 100 FPM Hydraulic Variable
Max Table Load (Including Chuck): 930 Lbs.
Hydraulic Motor: 2 HP
Rapid Wheelhead Feed Rate: 19 IPM
Auto Wheelhead Downfeed Increments: .0001" -.0015" Per Stroke
Hand Wheelhead Downfeed Increments: .0001" Graduations / .05" Per Revolution Handhweel
Cross Feed Rapid Traverse Rate: 4-40 IPM
Cross Feed Automatic Increments: .02" - .08"
Max Table Travel Powered: 29.5"
Spindle Drive: 5 HP
Wheelhead Elevation Motor: .5 HP
Max Cross Feed Travel: 13.4"
Hydraulic Pump Motor: 2HP
Verrical Rapid Feed motor: .5 HP
Seller Company: Detail Tool & Engineering OOB
Seller Contact: DENNIS IVERSON Phone: (763) 427-1500
Item Location: Detail Tool & Engineering, 3119 84th Ln NE, Blaine, MN 55449
Location Contact: Machinesused.com . Phone: (763) 745-1166
Inspection Date & Time: November 19th and 29th, 9AM to 4PM
Loading Dock: Ground Level Paved Lot
Removal Dates and Times: This item must be removed between Monday, December 6, 2021 and Wednesday, December 8, 2021
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, December 1, 2021
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BYDecember 8, 2021
- ALL PAYMENTS DUE BY Wednesday, December 1, 2021
Bidding Complete
Current Bid: $7,275.00
Bid Increment: $25.00
Minimum Bid: $7,300.00
Bidding Completed