Bridgeport Series II with 2J 1-1/2 HP Head & Series II-4 HP Head, MTech DROII-2M 2-Axis DRO, 11"x58" Table, Power Knee - Longitudinal and Cross Feeds
LOT No: 50Category: Vertical, Knee Type
buyer premium 15.000%
will be charged on this item
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
03/07/2023 12:00:00 AM CT
03/21/2023 10:19:58 AM CT
Current High Bid
# of bids
Curr. High Bidder
Lot 50: Bridgeport Series II with 2J 1-1/2 HP Head & Series II-4 HP Head, MTech DROII-2M 2-Axis DRO, 11"x58" Table, Power Knee - Longitudinal and Cross Feeds
MTech DROII-2M 2-Axis DRO, 11" x 58" Table, (1) Bridgeport 2J 1-1/2 HP Head, (1) Bridgeport Series II-4HP Head, Power Knee, Power Longitudinal Feed, Power Cross Feed, Power Quill Feed, Assorted R8 Collets, Assorted NMTB-40 Tool Holders
NOTE: Vise in photos is NOT included
230/460 Volts, 3 Phase - Currently Wired for 460 Volt Operation
Manufacturer: Bridgeport Model: Series II Serial Number: 394
Main Unit Approx Weight: 5220.00 lbs
Main Unit Dimensions (in inches): Length: 76.00" Width: 74.00" Height: 102.00"
Table Size: 11" x 58"
Longitudinal Travel: 30"
Cross Travel: 15"
Quill Travel: 5" Power Feed
Knee Travel: 16"
Power Quill Feeds: Variable Speed .6 - 2.5 IPM
Spindle Taper: 2J Head - R8, Series II-4HP Head NMTB 40
Spindle Speeds: Series II 4HP - Variable Speed in (2) Ranges: 50-400 RPM and 450-3,500 RPM
Spindle Speeds: 2J Head - Variable Speed in (2) Ranges: 60-400 RPM and 500-4200 RPM
Spindle Nose to Table Min-Max: 1" Minimum - 22" Maximum
Spindle Drive: 2J Head - 1-1/2HP, Series II-4HP
Spindle Center to Column Distance: 10-5/8" - 26-5/8"
Maximum Weight pof Workpiece: 1,500 Lbs.
Overarm Ram Adjustment: 16"
Feed Rate X & Y: 3/8" to 24 IPM Power Table and Saddle Travels
Feed Rate Z: 3/16" to 12 IPM Power Knee Travel
Head Tilt Front to Back: +/- 30 Degrees
Seller Company: Aroplax Corp.
Seller Contact: MIKE THONVOLD Phone: (763) 295-5002 ext. 3329
Item Location: Aroplax Corp., 200 Chelsea Road, Monticello, MN 55362
Location Contact: MIKE THONVOLD Phone: (763) 295-5002 ext. 3329
Inspection Date & Time: By Appointment with Sellers - Normal Business Hours M-F
Removal Dates and Times: This item must be removed between Wednesday, March 22, 2023 and Friday, March 31, 2023
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, March 22, 2023
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Friday, March 31, 2023
- ALL PAYMENTS DUE BY Wednesday, March 22, 2023
Buyer is Responsible for Prep and Removal of Item. Rigger is required to load this Item. Buyer responsible for Rigger. Suggested Riggers: CLICK HERE
Current Bid: $1,520.00
Bid Increment: $10.00
Minimum Bid: $1,530.00