FMB Turbo 8-80 Magazine Bar Feed
LOT No: 50Category: Servo, Magazine Style
Server time
---
buyer premium 15.000%
will be charged on this item
tax 7.525%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
06/03/2025 12:00:00 AM CT
Date Ending
06/17/2025 10:00:00 AM CT
Time Remaining
---
Current High Bid
$0.00
# of bids
0
Curr. High Bidder
First Bid
$100.00
Item Location
Dayton, MN
Country
US
Lot 50: FMB Turbo 8-80 Magazine Bar Feed
Equipped With:
Assorted Channel Sets and Pushers for 65mm & 55mm bars. NOTE: Needs repair, this was previously hooked up to the Nakamura Tome Super NTM3, Lot 20 in this auction.
Manufacturer: FMB Model: Turbo 8-80 Magazine Bar Feed Year: 2008 Serial Number: 28-220247
Main Unit Approx Weight: 7260.00 lbs
Main Unit Dimensions (in inches): Length: 164.00" Width: 36.00" Height: 67.00"
Components:
Control Unit: Length: 40.00" Width: 17.00" Height: 26.00"
Tank: Length: 28.00" Width: 20.00" Height: 26.00"
Tote of Channel Sets: Length: 30.00" Width: 20.00" Height: 18.00"
Tote of Channel Sets: Length: 30.00" Width: 20.00" Height: 18.00"
Specs:
Control: Bosch Motion Control
Bar Diameter Capacity: .315" - 3.149" w/Prep, .315"-3.071" w/o Prep
Max Bar Length: 4200mm / 13' 8"
Max Number of Bars: 11" Wide Magazine Rack Capacity
Min Bar Length: 1000 mm (39.4")
Max Remnant Length: 530 mm (20.8")
Magazine Rack Capacity: 11"
Bar Loading Cycle Time: 20 seconds for 12' Bar
Forward Feed Rate: 2360 IPM, Adjustable
Return Feed Rate: 0-1650 !PM, Adjustable
Operating Voltage: 230 Volt/60 Hz 3-Phase
Seller Company: Graco Inc - Dayton
Seller Contact: Nathan Seelig Phone: (612) 623-6000
Item Location: Graco Inc - Dayton, 12655 W French Lake Road, Dayton, MN 55327
Location Contact: Nathan Seelig Phone: (612) 623-6000
Removal Dates and Times: This item must be removed between Tuesday, June 17, 2025 and Friday, June 27, 2025
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, June 18th
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Friday, June 27th
- ALL PAYMENTS DUE BY Wednesday, June 18th
Buyer is Responsible for Prep and Removal of Item. Rigger is required to load this Item. Buyer responsible for Rigger. Cullinan Rigging is the exclusive rigger for this item. Contact Brandon for more information.
Cullinan Rigging
6815 McKinley St. NW
Ramsey, MN 55303
Brandon Cullinan
Phone: 763-422-9141
Fax: 651-422-9231
Email: sales@cullinanrigging.com
Bid NOW
Current Bid: $0.00
Bid Increment: $1.00
Minimum Bid: $100.00