42cf94e3fba5619326c70fa7bede344f.jpg895d77ddc2cccfdbc98233545200b1cf.jpg3416509b709da595955c3245b4909f77.jpgbec1134074b231bd8d65a2a74ffa2d54.jpg3b3df8ac9047fe2db733932391679182.jpg
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con

Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con

LOT No: 12Category: 2-Axis Turning Center
All Auction Items
Server time
---
buyer premium 15.000%
will be charged on this item
tax 7.375%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
09/23/2025 12:00:00 AM CT
Date Ending
10/14/2025 11:00:00 AM CT
Time Remaining
bidding completed
Current High Bid
$21,575.00
# of bids
102
Curr. High Bidder
m****n
First Bid
$1.00
Item Location
Wyoming, MN
Country
US
Bid NowWatch ItemBid HistoryAsk Question
Lot 12: Haas ST-20 CNC Lathe Turning Center, 13"x22.5", 2.5" Bar Cap, Haas ServoBar 300 Bar Feed, Chip Con
Equipped With: 

Haas MainCon CNC Control, 12 Station Automatic Tool Turret, Auomatic Tool Presetter, Parts Catcher, Haas ServoBar 300 Bar Feed, 300 PSI High Pressure Coolant, Belt Type Chip Conveyor, Rigid Tapping, Samchully 8" 3-Jaw Chuck, Turret Tool Holders NOTE: Haas Shipping Bracket Has Been Installed on this Machine and Bar Feed Disconnected

Electrics:

195-26- Volt, 3 Phase

Manufacturer: Haas Model: ST-20 Year: 2012 Serial Number: 3091102
Main Unit Approx Weight: 12000.00 lbs
Main Unit Dimensions (in inches): Length: 124.00"  Width: 72.00"  Height: 77.00"
Components:
Hennig Chip Con: Length: 180.00"  Width: 20.00"  Height: 62.00"
Coolant Pump and Tank: Length: 77.00"  Width: 28.00"  Height: 26.00"
Shipping Height w Chip Con: Length: 152.00"  Width: 72.00"  Height: 77.00"
Haas ServoBar Feed: Length: 101.00"  Width: 55.00"  Height: 51.00"
Specs:
Control: Haas MainCon CNC Control
Max Swing Over Bed: 31.75"
Max Swng Over Saddle: 20.75"
Max Turning Diameter: 13"
Max Turning Length: 21"
Spindle Speeds: 4,000 Max RPM
Spindle Nose: A2-6
Hole Thru Spindle: 3.0"
Hole Thru Draw Tube: 2.5" Bar Capacity
Turret Capacity: 12 Station Bolt-On Turret
Turret Travels (X,Z): 9.3" x 21"
Rapid Traverse Rate (X/Z): 945 IPM
Tailstock?: NO
Spindle Drive: 20 HP Vector Spindle Drive
Seller Company: Regal Machine - South
Seller Contact: Greg Evgen Phone: (763) 745-1166
Item Location: Regal Machine - South, 26615 Fallbrook Avenue, Wyoming, MN 55092
Location Contact: Machinesused.com Auction Phone: (763) 745-1166
Inspection Date & Time: Friday, October 10, 2025 9AM to 4PM
Dock Door: 12' x 12' Ground Level Door
Loading Dock: Ground Level
Removal Dates and Times: This item must be removed between Tuesday, October 21, 2025 and Tuesday, October 21, 2025
  • Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
  • VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
  • ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
  • All Payments made to Machinesused.com prior to item removal.
  • All Payments Due to Machinesused.com by Wednesday, October 15, 2025 4PM Central
  • Auction Held ONLINE ONLY at www.machinesused.com
  • 15% Buyer's Premium
  • Applicable Sales Tax Charged - SEE SALES TAX
  • Auction Uses DYNAMIC CLOSE: Click Here for More Info
  • All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
  • CLICK HERE FOR TERMS AND CONDITIONS
  • ALL ITEMS MUST BE REMOVED BY October 23, 2025
  • ALL PAYMENTS DUE BY Wednesday, October 15, 2025 4PM Central

⚠️ SPECIAL REMOVAL – LOCATION 2

Regal Machine South: 26615 Fallbrook Ave N, Wyoming, MN 55092

🏗️ Items Requiring Forklift: By appointment only with rigger on Tuesday, Oct 21, 2025.

No walk-ins. Buyer is responsible for all rigging, loading, and removal costs.

 

Exclusive Rigger: Quickway Rigging

Contact: Tony Miner | Email: tonyminer@quickwayrigging.com

Cell: (763) 226-7383 | Office: (763) 784-4295

 

Arrive on time with paid invoice and proper PPE. Site staff cannot assist with loading.

Missed appointments may require rescheduling. Contact Quickway Rigging with questions.

Bidding Complete

Current Bid: $21,575.00
Bid Increment: $100.00
Minimum Bid: $21,675.00
Bidding Completed

VIDEOS