Fryer CM-15 CNC Vertical Machining Center, Siemens 828D CNC Control, 8 ATC, CAT 40, 8000 RPM
LOT No: 10Category: CNC Vertical Machining Center, Bed Type
Server time
---
buyer premium 15.000%
will be charged on this item
tax 7.750%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
08/04/2026 12:00:00 AM CT
Date Ending
08/18/2026 10:00:00 AM CT
Time Remaining
---
Current High Bid
$100.00
# of bids
1
Curr. High Bidder
B****5
First Bid
$100.00
Item Location
Fargo, ND
Country
US
Lot 10: Fryer CM-15 CNC Vertical Machining Center, Siemens 828D CNC Control, 8 ATC, CAT 40, 8000 RPM
Equipped With:
Siemens 828D CNC Control, Probing System with Part Probe and Tool Setter, 8-Station Carousel Style Automatic Tool Changer, CAT 40, 7.5 HP, 8,000 RPM Maximum Spindle Speeds, Habor Chiller. NOTE: Tool Holders and work holding in pictures and video are NOT included, No Manuals or Documentation.
Electrics:
220 Volt, 3 Phase
Manufacturer: Fryer Model: CM-15 Serial Number: 22022
Main Unit Approx Weight: 2500.00 lbs
Main Unit Dimensions (in inches): Length: 60.00" Width: 60.00" Height: 96.00"
Components:
Chiller: Length: 18.00" Width: 15.00" Height: 36.00"
Specs:
Machine Control: Siemens 828D CNC Control
Table Size: 32" x 10"
Machine Travels (X/Y/Z): 15" / 10" / 15"
Spindle To Table Distance: 4" to 19"
Spindle Center to Column Distance: 11"
Table Capacity: 350 LBS
Spindle Taper: CAT 40
Spindle Speeds: 60 - 8,000 RPM
Rapid Traverse Rate (X/Y/Z): 500 IPM
Maximum Cutting Feed Rate: 0.001 – 400 IPM
Tool Changer Style: Carousel
Tool Changer Capacity: 8 Tools
Spindle Drive: 7.5 HP
Seller Company: North Dakota State University - Fargo
Seller Contact: Rob Sailer Phone: (701) 231-5347
Item Location: North Dakota State University - Fargo, 1319 Centennial Blvd, Fargo, ND 58102
Location Contact: Rob Sailer Phone: (701) 541-6427
Inspection Date & Time: By Appointment Normal Business Hours Monday-Friday
Removal Dates and Times: This item must be removed between Tuesday, August 18, 2026 and Friday, August 28, 2026
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by 8/19/2026 BY 4PM
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY 8/28/2026 CT
- ALL PAYMENTS DUE BY 8/19/2026 BY 4pm
Exclusive On-Site Rigger: Kanga Machinery is the exclusive rigger for this auction on the date of Tuesday 8/25/2026 to load out items. Items loaded after this date will not be guarateed quoted prices. Buyer is responsible for all prep and removal.
Estimates & Payment: Estimated load fee for this date is $425.00. Buyer must arrange rigging and payment directly with the rigger. Fee will increase if not scheduled for date of Tuesday 8/25/2026.
Kanga Machinery.
510 South 8th St. Wahpeton, ND 68111
Contact: Jack Jensen
Phone: (701)-899-0543
Email: kangamachinery@hotmail.com
Trucking: Buyer may use a carrier of their choice.
Suggested Carriers: CLICK HERE
Bid NOW
Current Bid: $100.00
Bid Increment: $1.00
Minimum Bid: $101.00