Arboga RLM-3512 Radial Arm Drill, Power Elevation, Box Table 3 HP, Power Quill Feed and MORE!
LOT No: 260Category: Radial Arm Drills
Server time
---
buyer premium 15.000%
will be charged on this item
tax 6.875%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
01/13/2026 12:00:00 AM CT
Date Ending
01/27/2026 10:00:00 AM CT
Time Remaining
---
Current High Bid
$0.00
# of bids
0
Curr. High Bidder
First Bid
$1.00
Item Location
Elk River, MN
Country
US
Lot 260: Arboga RLM-3512 Radial Arm Drill, Power Elevation, Box Table 3 HP, Power Quill Feed and MORE!
Equipped With:
Power Elevation, Manual Clamping, 3HP, Box Table, Power Quill Feed, (12) Spindle Speeds: 70 - 1965 RPM
Electrics:
230 Volt, 3 Phase
Manufacturer: Arboga Model: RLM-3512 Serial Number: 253444
Main Unit Approx Weight: 3000.00 lbs
Main Unit Dimensions (in inches): Length: 60.00" Width: 30.00" Height: 84.00"
Specs:
Column Diameter: 9"
Arm Length: 40"
Max Spindle Center to Column: 39-3/4"
Quilll Travel: 7-5/8"
Max Spndle to Base: 46-1/4"
Spindle Speeds: (12) 70 - 1965 RPM
Spindle Feed Rates: .004, .006, .010, .016 IPR
Spindle Taper: #4 Morse Taper
Clamping Style: Manual
Base Dimensions: 38" x 24"
Box Table Dimensions: 20" x 15-3/4" x 11-3/4"
Spindle Drive: 3 HP
Seller Company: Falcon Plastics (Formerly AVID International Molding Solutions)
Seller Contact: Dawn Munson Phone: (605) 691-4262
Item Location: Falcon Plastics (Formerly AVID International Molding Solutions), 19178 Industrial Blvd., Elk River, MN 55330-2492
Location Contact: Dawn Munson Phone: (763) 441-6100
Inspection Date & Time: By Appointment Normal Business Hours Monday-Friday
Removal Dates and Times: This item must be removed between Tuesday, January 27, 2026 and Friday, February 6, 2026
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by: Wednesday, January 28, 2026 4PM CT
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY: Friday, February 6, 2026
- ALL PAYMENTS DUE BY: Wednesday, January 28, 2026 4PM CT
Buyer is Responsible for Prep and Removal of Item. Rigger is required to load this Item. Buyer responsible for Rigger. Suggested Riggers: CLICK HERE
Bid NOW
Current Bid: $0.00
Bid Increment: $1.00
Minimum Bid: $1.00