Haas HL-3 2-Axis CNC Turning Center
LOT No: 50Category: 2-Axis Turning Center
Server time
---
buyer premium 15.000%
will be charged on this item
tax 6.875%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
07/15/2025 12:00:00 AM CT
Date Ending
07/29/2025 10:00:00 AM CT
Time Remaining
---
Current High Bid
$0.00
# of bids
0
Curr. High Bidder
First Bid
$100.00
Item Location
Morris, MN
Country
US
Lot 50: Haas HL-3 2-Axis CNC Turning Center
Equipped With:
Haas 32-Bit CNC Control, 10" 3-Jaw Chuck, 12-Station Turret with Assorted Tool Holders, Tool Presetter, Chip Auger (Motor needs to be repaired/replaced), 1MB Expanded Memory, 3.5" Floppy, Quick Code, Rigid Tapping, Brand New Haas Spindle Motor. NOTE: Machine sometimes gets spindle fault at full speed, purchased new motor, but never installed. No Coolant Pump
Manufacturer: Haas Model: HL-3 Serial Number: 61873
Main Unit Approx Weight: 0.00 lbs
Main Unit Dimensions (in inches): Length: 0.00" Width: 0.00" Height: 0.00"
Specs:
Control: Haas 32-Bit CNC Control
Max Swing Over Bed: 24"
Max Swng Over Saddle: 9.5"
Max Turning Diameter: 14.5"
Max Turning Length: 34"
Max Bar Capacity: 2.5"
Hole Thru Draw Tube: 2.56"
Hole Thru Spindle: 3.0"
Spindle Nose: A2-6
Spindle Speeds: up to 3400 RPM
Turret Capacity: 12 Tools
Turret Travels (X,Z): 11.3" / 34"
Rapid Traverse Rate (X/Z): 710 IPM
Tailstock?: Yes
Tailstock Quill Diameter / Taper: MT4
Tailstock Travel: 33.5"
Spindle Drive: 30 HP
Seller Company: Superior Industries LLC - Morris, MN
Seller Contact: Brad Zimmel Phone: (320) 589-2406
Item Location: Superior Industries LLC - Morris, MN, 315 East Highway 28, Morris, MN 56267
Location Contact: Brad Zimmel Phone: (320) 589-2406
Inspection Date & Time: By Appointment Normal Business Hours Monday-Friday
Removal Dates and Times: This item must be removed between Tuesday, July 29, 2025 and Friday, August 8, 2025
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, July 30th BY 4PM
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Friday, August 8th
- ALL PAYMENTS DUE BY Wednesday, July 30th BY 4PM
Bid NOW
Current Bid: $0.00
Bid Increment: $1.00
Minimum Bid: $100.00