Lot 20: Haas SL-10 CNC 2-Axis Turning Center with 3-Jaw Chuck, Tailstock, and 12 Station Turret, In-Base Coolant System
Haas 32-Bit CNC Control, 6" 3-Jaw Hydraulic Chuck, 12 Station Bolt-On Turret, Tailstock with Hydraulic Quill, Coolant System with in-base tank.
Manufacturer: Haas Model: SL-10 Year: 2001 Serial Number: 64043
Main Unit Approx Weight: 5500.00 lbs
Main Unit Dimensions (in inches): Length: 102.00" Width: 55.00" Height: 69.00"
Control: Haas 32-Bit CNC Control
Max Swing Over Bed: 16.25"
Max Swng Over Saddle: 8"
Max Turning Diameter: 11"
Max Turning Length: 14"
Spindle Speeds: 6,000 Max RPM
Spindle Drive: 15 HP
Hole Thru Spindle: 2.31"
Spindle Nose: A2-5
Hole Thru Draw Tube: 1.81"
Turret Capacity: 12 Station
Turret Travels (X,Z): 6.25" x 14"
Rapid Traverse Rate (X/Z): 1,200 IPM
Turret Index Time: 1 Second (Per 1 Tool)
Tailstock Quill Diameter / Taper: #3MT
Tailstock Quill Travel: 4.0" Hydraulic Travel
Max Bar Capacity: 1.8"
Max Swing Over Front Apron: 16.25"
Max Swing Over Cross Slide: 8"
Chuck Size: 6.5"
Rapid Traverse Rate: 710 IPM
Seller Company: Regal Plastic - Iowa
Seller Contact: Scott Clary Phone: (515) 223-8080
Item Location: Regal Plastic - Papillion NE, 522 N Polk St, Papillion, NE 68046
Location Contact: MachinesUsed.com Phone: (763) 745-1166
Inspection Date & Time: Preview By Appointment with Seller(s) Normal Business Hours M-F
Removal Dates and Times: This item must be removed between Tuesday, October 25, 2022 and Friday, November 4, 2022
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by OCTOBER 26TH, 2022 BY 4PM
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY NOVEMBER 4TH, 2022
- ALL PAYMENTS DUE BY OCTOBER 26TH BY 4PM
Buyer is Responsible for Prep and Removal of Item. Rigger is required to load this Item. Buyer responsible for Rigger. Suggested Riggers: CLICK HERE
Recommended Rigger for this item:
205 NW 27th St.
Lincon, NE 68528