Lagun FTV-2 Vertical Knee Mill with Newall Topaz 2-Axis DRO, Mitutoyo Quill Scale, Servo Power Feed Table
LOT No: 90Category: Vertical Mill, Knee Type
Server time
---
buyer premium 15.000%
will be charged on this item
tax 8.125%
will be charged on this item
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
12/16/2025 12:00:00 AM CT
Date Ending
01/13/2026 10:00:00 AM CT
Time Remaining
---
Current High Bid
$0.00
# of bids
0
Curr. High Bidder
First Bid
$1.00
Item Location
Blaine, MN
Country
US
Lot 90: Lagun FTV-2 Vertical Knee Mill with Newall Topaz 2-Axis DRO, Mitutoyo Quill Scale, Servo Power Feed Table
Equipped With:
Variable Spindle Speed to 4200 RPM, R8 Spindle Taper Newall Topaz 2-Axis Digital Readouts, Mitutoyo Quill Scale, Servo X-Axis Variable Speed Power Table Feed, Pneumatic Draw Bar, Knee Handle, Quill Handle, Collets and Tooling as Shown.
Electrics:
220 Volt, 3 Phase
Manufacturer: Lagun Model: FTV-2 Serial Number: SE 43180
Main Unit Approx Weight: 2500.00 lbs
Main Unit Dimensions (in inches): Length: 68.00" Width: 75.00" Height: 90.00"
Specs:
Table Size: 10" x 50"
Longitudinal Travel: 33"
Quill Travel: 5" Power Feed and Manual
Cross Travel: 16"
Spindle Taper: R8
Power Quill Feeds: (3) 0.0015″/rev, 0.003″/rev & 0.006″/rev
Spindle Speeds: 55-4250 RPM Variable
Knee Travel: 16"
Spindle Drive: 3HP Motor
Spindle Center to Column Distance: 5" - 27"
Overarm Ram Adjustment: 22-3/16" Manual Adjust
Head Swivel Left to Right: + /- 90 Degrees
Head Tilt Front to Back: +/- 45 Degrees
Seller Company: GB Tool Inc
Seller Contact: Machinesused.com GBTool Phone: (763) 745-1166
Item Location: GB Tool Inc, 1580 93rd NE, Blaine, MN 55449
Location Contact: Machinesused.com GBTool Phone: (763) 745-1166
Inspection Date & Time: Friday, January 9, 2026 9AM-4PM
Dock Door: 144" x 144" Ground | 96" x 120"H Truck Level (48"H) Dock Door
Loading Dock: Ground Level, and Truck Level Doors, Paved Lot
Removal Dates and Times: This item must be removed between Monday, January 19, 2026 and Wednesday, January 21, 2026
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by Wednesday, January 14, 2026 4PM CT
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged - SEE SALES TAX
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY Wednesday, January 21, 2026
- ALL PAYMENTS DUE BY Wednesday, January 14, 2026 4PM CT
Bid NOW
Current Bid: $0.00
Bid Increment: $1.00
Minimum Bid: $1.00