Okuma Crown 762E CNC Turning Center with 10" SMW Chuck, Hydraulic Tailstock, and Chip Conveyor
LOT No: 190Category: 2-Axis Turning Center
Server time
---
buyer premium 15.000%
will be charged on this item
tax 5.000%
will be charged on this item
additional
fees applicable
Point of Sale Tax Amount, Actual Buyer Applicable Taxes will be determined post Auction and applied to buyer invoice.
Date Started
11/19/2019 12:05:00 AM CT
Date Ending
12/10/2019 11:03:00 AM CT
Time Remaining
bidding completed
Current High Bid
$1,001.00
# of bids
12
Curr. High Bidder
t****a
First Bid
$1.00
Item Location
Hudson, WI
Country
US
Lot 190: Okuma Crown 762E CNC Turning Center with 10" SMW Chuck, Hydraulic Tailstock, and Chip Conveyor
Equipped With:
Okuma OSP-U100L CNC Control, 10" 3-Jaw SMW AutoBlok Hydraulic Chuck with Foot Pedal Actuator, Hydraulic Tailstock with Foot Pedal Quill Actuator, 12 Station Bolt on Turret with Wedge Clamps and Tool Holders as Shown, Automatic Door, RS-232 Port, Chip Conveyor, Coolant System with Tank & Pump, All Available Manuals as shown.
Description:
Seller will load this machine onto a flat bed trailer for a $250 load fee. This will be applied to your auction invoice.
Electrics:
208-230 Volt 3 Phase
Manufacturer: Okuma Model: Crown 762E Year: 1997 Serial Number: 09120414
Main Unit Approx Weight: 4400.00 lbs
Main Unit Dimensions (in inches): Length: 95.00" Width: 70.00" Height: 67.00"
Specs:
Control: Okuma OSPU100L CNC Control
Max Swing Over Bed: 21.65"
Max Turning Length: 19.68" Max Nominal Part Length
Max Swng Over Saddle: 15.75"
Max Turning Diameter: 10.63"
Spindle Nose: JIS A2-6
Spindle Speeds: 75 - 4,200 RPM
Number of Steps: Stepless
Spindle Drive: 12 HP
Hole Thru Spindle: 2.44"
Turret Capacity: 12 Stations
Turret Travels (X,Z): 7.28" x 20.47"
Rapid Traverse Rate (X/Z): 590.55 / 787.4 ipm
Max Bar Capacity: 2.00"
Tailstock?: Hydraulic Tailstock
Tailstock Travel: 18"
Tailstock Quill Diameter / Taper: 3.54" / MT #5
Seller Company: United Gear & Assembly
Seller Contact: PAUL MANDEL Phone: (715) 386-5867 ext. 132
Item Location: United Gear & Assembly, 1700 Livingstone Rd., Hudson, WI 54016
Location Contact: Paul Mandel Phone: (715) 386-5867
Inspection Date & Time: By Appointment with Sellers - Normal Business Hours M-F
Removal Dates and Times: This item must be removed between Tuesday, December 10, 2019 and Friday, December 20, 2019
- Acceptable Payment: Cash, Wire Transfer, Cashier's Check, Money Order
- VISA / MASTERCARD/DISCOVER ACCEPTED FOR U.S. BUYERS AMOUNTS UP TO $2,500 WITH 3% ADDITIONAL FINANCE CHARGE
- ACH Auto Payment for US Buyers with Invoices $2,500 Or Under
- All Payments made to Machinesused.com prior to item removal.
- All Payments Due to Machinesused.com by WEDNESDAY, DECEMBER 11TH, 2019 BY 4PM
- Auction Held ONLINE ONLY at www.machinesused.com
- 15% Buyer's Premium
- Applicable Sales Tax Charged
- Auction Uses DYNAMIC CLOSE: Click Here for More Info
- All Items Sold As Is, Where Is - Buyers Responsible for Inspection & Removal
- CLICK HERE FOR TERMS AND CONDITIONS
- ALL ITEMS MUST BE REMOVED BY FRIDAY, DECEMBER 20TH, 2019
- ALL PAYMENTS DUE BY WEDNESDAY, DECEMBER 11TH, 2019 BY 4PM
Load Fee: $250.00
Bidding Complete
Current Bid: $1,001.00
Bid Increment: $10.00
Minimum Bid: $1,011.00
Bidding Completed