Bridgeport Series 1 2HP Vertical Mill, Variable Speed Spindle, Sony Magnescale 2-Axis Digital Readout, Power Table Feed
Table Size: 9" x 42"
Longitudinal Travel: 30"
Cross Travel: 12"
Quill Travel: 5" Power Feed
Knee Travel: 16"
Power Quill Feeds: (3) .0015 / .003 / .006 IPR
Spindle Taper: R-8
Spindle Speeds: 60-4200 RPM Variable in 2 Ranges
Spindle Nose to Table Min-Max: 2.5" - 18.5" Plus 4" with Riser
Spindle Drive: 2 HP
Ram Travel (Adjustment Range): 12"
Spindle Center to Column: 6.75" - 18.75"
Table to Spindle Nose Minimum: 2.5"
Max Table Load: 750 Lbs.
Head Swivel Left to Right: +/- 90 Degrees
Head Tilt Front to Back: +/- 45 Degrees
Power Quill Feed, R8 Spindle Taper, Sony Magnescale EA-210 2-Axis Digital Readout with .0002" Resolution, Bridgeport Variable Speed Power Table Feed, 9"x42" Table, Riser, Bijur 1 Shot Lubrication, Quill Handle, Knee Handle, Draw Bar
Power Quill Feed, R8 Spindle Taper, Sony Magnescale EA-210 2-Axis Digital Readout with .0002" Resolution, Bridgeport Variable Speed Power Table Feed, 9"x42" Table, Riser, Bijur 1 Shot Lubrication, Quill Handle, Knee Handle, Draw Bar
220/440 Volt, 3 Phase, Curently Wired 220 Volt