42cf94e3fba5619326c70fa7bede344f.jpg895d77ddc2cccfdbc98233545200b1cf.jpg3416509b709da595955c3245b4909f77.jpgbec1134074b231bd8d65a2a74ffa2d54.jpg3b3df8ac9047fe2db733932391679182.jpg
Bridgeport Series II Knee Mill with AcuRite 200S 3-Axis Digital Readout, Power Feeds

Bridgeport Series II Knee Mill with AcuRite 200S 3-Axis Digital Readout, Power Feeds

Stock: 6684Manufacturer: Bridgeport Model: Series IIAge: 1994

Table Size: 11" x 58"

Longitudinal Travel: 30"

Cross Travel: 15"

Quill Travel: 5" Hand or Power Feed

Knee Travel: 16"

Power Quill Feeds: Variable Speed .6 - 2.5 IPM

Spindle Taper: Universal Kwik Switch 300

Spindle Speeds: Variable Speed in (2) Ranges: 50-400 RPM and 450-3,500 RPM

Spindle Nose to Table Min-Max: 1" Minimum - 22" Maximum

Spindle Drive: 4 HP

Spindle Center to Column Distance: 10-5/8" - 26-5/8"

Maximum Weight pof Workpiece: 1,500 Lbs.

Overarm Ram Adjustment: 16"

Feed Rate X & Y: 3/8" to 24 IPM Power Table and Saddle Travels

Feed Rate Z: 3/16" to 12 IPM Power Knee Travel

Head Swivel Left to Right: +/- 90 Degrees

Head Tilt Front to Back: +/- 30 Degrees

Equipped With:

11" x 58" T-Slotted Work Table, AcuRite 200S 3-Axis Digital Readout with .0002" Resolution Scales on X, Y, and Knee (Z), Variable Speed Spindle (2 Ranges) 50-400 RPM 450-3500 RPM, Variable Speed  Power Knee, Longitudinal, and Cross Travel Feeds, Manual/Power Quill Feeds with Variable Control, Universal Kwik Switch 300 Spindle Taper, Manual Draw Bar, Knee Handle, Quill Handle, Assorted Univeral Kwik Switch #300 Tool Holders and Adapters Included. 

Electrics:

208 / 220/ 440 Volt, 3 Phase - CURRENTLY WIRE FOR: 208 Volt, 3 Phase