Doosan NHP 4000 Horizontal Machining Center with Full 4th-Axis, Spindle Chiller, High Torque 15,000 RPM Spindle,LNS Chip Conveyor, 1000 PSI Through Spindle Coolant, Probing, HSM Level 1, Macro Programming
CNC Control: Fanuc Series 31i - Model B Control
Pallet Size: 15.7" X 15.7"
Machine Travels (X/Y/Z): 22"/25.2"/26"
Spindle Nose to Pallet Center Distance: 3.1" - 29.1"
Number of Pallet Stations: 2
Pallet Indexing: Full 4th Axis .001 Degree
Max Pallet Load: 660 lbs
Pallet Change Time: 7 Seconds
Rapid Traverse Rate (X/Y/Z): 2362/2362/2362
Max Cutting Feed Rate: 2362
Spindle Taper: CAT40
Spindle Speeds: 15,000 RPM
Transmission:
Toolchanger Capacity: 60
Max Tool Weight: 26.5 lbs
Max Tool Length/Diameter: 17.7"/6.7"
Tool to Tool Time: .9 Seconds
Spindle Drive: 40 HP
Fanuc Series 31i - Model B Control,15,000 RPM Spindle, Auto Tool Damage Detection, .001 Degree Full 4th-Axis, USB Port, HYDCOOl HKC-110T Spindle Chiller, Shower Coolant, Oil Skimmer, LNS/Turbo Drum Scraper Rear Discharge Chip Conveyor With Variable Speed & M-Code Capability, ChipBlaster Cyclone 1000 PSI Through Spindle Coolant with Integral 100 Gallon Tank, ChipBlaster Sludge Tank, Probing, HSM Level 1, Macro Programming, 60 Tool Capacity
Fanuc Series 31i - Model B Control,15,000 RPM Spindle, Auto Tool Damage Detection, .001 Degree Full 4th-Axis, USB Port, HYDCOOl HKC-110T Spindle Chiller, Shower Coolant, Oil Skimmer, LNS/Turbo Drum Scraper Rear Discharge Chip Conveyor With Variable Speed & M-Code Capability, ChipBlaster Cyclone 1000 PSI Through Spindle Coolant with Integral 100 Gallon Tank, ChipBlaster Sludge Tank, Probing, HSM Level 1, Macro Programming, 60 Tool Capacity
** This machine is currenty on a pallet system. Owner has all of the parts to return it to a stand alone unit. Will include 2 pallets
220V 3 Phase