Haas DT-1 CNC Drill And Tapping Center with Rigid Tap and High Speed Machining
Machine Control: Haas
Table Size: 26" x 15"
Machine Travels (X/Y/Z): 20" x 16" x 15.5"
Table Capacity: 250 Lb
Spindle Taper: BT-30
Spindle Speeds: 0-12,000 RPM
Transmission: Inline Direct Drive
Rapid Traverse Rate (X/Y/Z): 2400 / 2400 / 2400 ipm
Maximum Cutting Feed Rate: 1200 ipm
Tool Changer Style: Side Tool Mount
Tool Changer Capacity: 20 + 1
Tool Change Time: 1.6 sec Chip to Chip
Max Tool Length: 7"
Max Tool weight: 2 Lbs.
Spindle Drive: 15 hp
Power Requirement: 195 - 260 V / 3 Phase
Spindle To Table Distance: 6" - 21.5"
Max Tapping Speed: Rigid Tapping to: 5,000 rpm
Max Tap Size (alum): 1/2 - 13
Max Tool Dia: 2.0"
Early Power Failure Detection, Automatic Air Gun, BT-30 Tapper Tooling (Aprox 20 Holders), Rigid Tap, Drill And Tap, High Speed Machining, 2- Chip Augers, 4th & 5th Axis Drives, Coolant Pump And Tank.
1G Acceleration/Deceleration rates
Low Hours: 1935 Cut Time