Haas SL-20APL CNC Turning Center with Live Milling, C-Axis Programmable and Automatic Parts Load / Unload
Control: Haas CNC Control with Coldfire Processor
Max Swing Over Bed: 23"
Max Swng Over Saddle: 9.5"
Max Turning Diameter: 10.3"
Max Turning Length: 20"
Spindle Speeds: 0 - 4,000 RPM
Spindle Nose: A2-6
Hole Thru Draw Tube: 2.06"
Spindle Drive: 20 HP Vector
Turret Capacity: 12 Station Hybrid Turret with 6 Station Live Capable
Turret Travels (X,Z): 8.45" / 20"
Rapid Traverse Rate (X/Z): 710 IPM
Auto Part Loader Table: 48" x 24" Work Area w 1,000 LB Table Load Capacity
Standard Gripper Capcity: (2) Parts, 15 Lbs. Each
Max Load/Unload Part Diameter: 5" Diameter Max, 16" Length Max Standard 7" Max Part Diameter w Optional Disc Gripper and Part Tray
Max Bar Capacity: 2"
Tailstock?: NO
Gantry Loader Rapid Traverse Rates (U/V/W Axes): 1,300 / 750 / 1,800 IPM
Auto Load Part Change Time: 30 Seconds Chip-to-Chip
Spindle Programmability: Full C-Axis (.001 Degree)
Live Milling Speeds: 0-3,000 RPM
Live Tool Drive: 5 HP
Haas CNC Control with Coldfire Processor, Haas Automatic Part Load / Unload Gantry System, Auto-Door, Parts Table, C-Axis Programmable Spindle, Live Milling, Hybrid VDI Style 12 Station Tool Turret (6 Station Live Capable), Tool Presetter, Ethernet, USB Port, (2) Live Axial Tool Holders, (2) Live Radial Tool Holders, Assorted Bolt-On Turret and VDI Static Tool Holders, Kitagawa 8" 3-Jaw Chuck, Remote Jog Handwheel, Internal Transformer, Manuals - Only 351 Spindle Hours!
Haas CNC Control with Coldfire Processor, Haas Automatic Part Load / Unload Gantry System, Auto-Door, Parts Table, C-Axis Programmable Spindle, Live Milling, Hybrid VDI Style 12 Station Tool Turret (6 Station Live Capable), Tool Presetter, Ethernet, USB Port, (2) Live Axial Tool Holders, (2) Live Radial Tool Holders, Assorted Bolt-On Turret and VDI Static Tool Holders, Kitagawa 8" 3-Jaw Chuck, Remote Jog Handwheel, Internal Transformer, Manuals
360-480 Volt, 3 Phase