Mori Seiki NLX2500SY/700 Multi-Axis CNC Turning Center with Y-Axis, Sub Spindle, Live Tool Turret, LNS Magazine Barfeeder, High Pressure Coolant, and Large Complement of Live Tooling.
Control: Mori Seiki M730BM CNC Control
Spindle Nose: A2-8 Main / A2-5 Sub
Main Spindle Chuck Size: 10" 3-Jaw Chuck and Quick Change Collet Chuck
Sub-SpindleChuck Size: Quick Change Collet Chuck
Max Swing Over Bed: 31"
Max Swing Over Cross Slide: 21.3"
Max Turning Diameter: 14.4" Max Turn Diameter
Main Spindle Speeds : 4000 Max RPM
Main Bar Capacity: 3.1" Bar Capacity
Main Spindle Drive: 24.7 HP
Sub-Spindle Speeds : 6000 Max RPM
Sub-Spindle Drive : 15HP
Live Tool Drive Motor: 7.5HP
Main Spindle Orientation: Full C-Axis
Live Tool Speeds: 6000 Max RPM
Sub-Spindle Orientation: Full C-Axis
Max Turning Length: 27.7"
Turret Capacity: 12 Stations - All Live Tool Capable
Turret Travels (X, Z, Y): 10.2" / 31.3" / +/- 2"
Rapid Traverse Rate: 1181 IPM X, Z-Axis / 393.7 IPM B-Axis
Mori Seiki M730BM CNC Control, Quick Change Collet Chucks on Main & Sub Spindle, 4000 Max RPM Main Spindle, 6000 Max RPM Sub Spindle, Full C-Axis on Main and Sub Spindle, Additional 10" 3-Jaw Chuck, LNS Quickload Servo Magazine Barfeeder with Pendant Control,12-Station Bolt on Turret with 12 Live Tool Capable Stations, Y-Axis on Turret, 6000 RPM 7.5HP Live Tool Drive, Swing Down Tool Presetter for Main Spindle, Modular Tool Presetter for Sub Spindle, Parts Catcher System with Small Parts Conveyor, Chip Blaster High Pressure Coolant Unit, LNS Turbo HB Chip Conveyor System, Complete Coolant System and Tank, Spindle Chiller, Hydraulic System, Mist Collector, Machine Manuals, Spindle Liners, Large amount of Live Tool Holders and Static Tool Holders Included as Shown in Photos. (3) WTO 2-Station Dual Sided Axial Live Tools, (3) Single Station Radial Live Tools, (2) WTO 2-Station Radial Live Tools, (2) Axial Live Tool Holders, Static Tool Holders, Collets, Chuck Jaws and more as shown.
220 Volt 3 Phase