Mori Seiki NTX1000/SZ CNC Mill/Turn Center with Sub Spindle, B-Axis Milling Head, 76 Station Tool Changer, and Lower Turret
Control: Mori Seiki MSX-711 IV (Fanuc)
Spindle Speeds: 6000 RPM
Spindle Nose: A2-5
Spindle Through Hole: 2.40"
Spindle Indexing: 0.0001 Degrees
Max Workpiece Swing: 14.57"
Distance Between Centers: 35"
Maximum Turning Diameter: 14.57"
Maximum Turning Length: 16.69"
Bar Capacity: 2.05"
Spindle 2 Speed: 6000 RPM
Spindle 2 Through Hole Diameter: 1.50"
Spindle 2 Nose Type: 3.15" G6 Flat Nose
Spindle 2 Min Index Angle: 0.0001 Degree
Turret Travel X/Z: 6.10" / 24.01"
BW-Axis: 4-Position Index
Milling Head Travel X/Y/Z: 14.96" / +/- 4.13" / 18.11 + 6.10 (ATC Travel)
Milling Head Rapid Rate X/Y/Z: 1574.8 / 1574.8 / 1968.5 IPM
Milling Head Spindle Speed: 12,000 RPM
Milling Head Spindle Taper: Capto C5
Milling Head B-Axis Range / Min Index Angle: +/- 120-Degrees / 0.0001 Degree
Tool Magazine Capacity: 76
Max Tool Diameter With/Without Adjacent Tools: 2.76" / 5.12"
Max Tool Weight: 11 lbs
Max Tool Length: 9.84" (If Tool Diameter Less Than 2.76"); 8.27" (If Tool Diameter 2.76" or More)
Mori Seiki MSX-711 IV CNC Control (Fanuc), 12,000 RPM B-Axis Milling head with 76 Station Tool Changer (Many Capto Tool Holders Included), Schunk Quick Change 7.25" 3-Jaw Chucks on Main & Sub Spindles, 5000 RPM Main Spindle with C-Axis, 6000 RPM Sub Spindle with C-Axis, 10-Station Bolt on Lower Turret (X,Z), Tool Presetter, Renishaw Parts Probing System with Dual Reader Eyes for Main & Sub Spindle Probing, Parts Exit Conveyor, Chip Blaster High Pressure Coolant Unit with Through Spindle Coolant on Milling Head, Daikin Inverter Chiller Unit, LNS Turbo HB Chip Conveyor, USB Port, Keys, Machine Manuals.
220 Volt 3 Phase