Tsugami M08SY CNC Lathe Turning Center, Live Milling, Sub-Spindle, Y-Axis, LNS Bar Feed, New 2022 - Very Low Hours!
Control: Fanuc 0i-TF PLus CNC Control
Max Turning Diameter: 11.02"
Max Turning Length: 14.96"
Main Bar Capacity: 2.56"
Spindle Nose: A2-6
Main Spindle Chuck Size: 8" Max
Main Spindle Speeds : 4,500 Max RPM
Main Spindle Orientation: Full C-Axis. (.001 Degree)
Main Spindle Bore: 2.87"
Sub-SpindleChuck Size: 6" Max
Sub-Spindle Speeds : 4,500 Max RPM
Sub-Spindle Travel: 19.92" ( A-Axis)
Sub-Spindle Orientation: Full C-Axis (.001 Degree)
Sub-Spindle Bore: 2.32" / 2.04 Thru Hole
Turret Capacity: 12 Stations Live Milling Capable
Turret Travels (X/Z): 8.7" x 15.75"
Y Axis Travel: +/- 1.97"
Rapids: X: 945 / Z: 1,181 / Y: 472 IPM / A: 1,181 IPM
Live Tool Speeds: 5,000 Max RPM
Main Spindle Drive: 14.8/10 HP
Sub-Spindle Drive : 10/7.4 HP
Live Tool Drive Motor: 5 HP / 2HP
Fanuc 0i-TF CNC Control, 12 Station Turret with Live Milling, Y-Axis Programmable Turret, C-Axis Programmable Main Spindle, Sub-Spindle with C-Axis Programmable, Rigid Tapping on Main and Sub and Live Spindles, 300 PSI High Pressure Coolant Thru Turret, Spindle Chiller, Parts Catcher and Conveyor, Tool Presetter, LNS Chip Conveyor, Royal QG-65 Collet Chuck, 16C Collet Chuck, 8" 3-Jaw Chuck, 6" 3-Jaw Chuck, (2)Axial Double-End Live Tool (ER32), (1) Radial Live Tool Holder, (1) Axial Live Tool Holder, LNS Quick Load Servo 80 S2 Magazine Bar Loader (1/4-3-1/8" x 63" Capacity Bar Loader), Exomist HPM400 Mist Collector, (4) Bolt-On Double Boring Tool Holders, (4) Static Turning Tool Holders, Manuals. Only 800 Spindle Hours!
220 Volt, 3 Phase